_ |
DALI-Dim-Converter-Control DC NVOrder-Nr.: 85.01.002Type : DC NV
DALI-Dim-Converter-Control DC NV
|
DALI - Dim/Converter Controll NV - Controller Broadcast 0-10V 1-10V ➤ DALI
Downloads:
![]() |
Data Sheet |
DALI DIM/CONVERTER CONTROL (DC NV) 1-10V (0-10 V) analog -> DALI Converter
with (Multi-) Sensor-control and 1 – and 2-Switch dim functions
Dim-and Switch Functions:
The DALI Dim/Converter Control DC NV is suitable for the control of max. 100 DALI ballasts or transformers. Just after connection to mains the module is ready for operation. A commencement or a group assignment is not required. The module includes the current supply for the interface of the 100 DALI ballasts.
The DALI Dim/Converter Control has a selector switch for:
- The analog-digital-conversion from electronic ballasts or transformers with 1-10V interface and from Altenburgerdimmers with 0-10V interface to the DALI-interfaces
- 1-pushbutton and 2-pushbutton switch dim-functions
- (Multi-)Sensor- functions
Conversions
While the DALI Converter (digital -> analog 1-10V/0-10V) transfers the DALI-signals into analog signals the DALI Dim/Converter Control transforms the analog signals into digital signals.
This offers the following possibilities:
- ON/OFF switching of DALI ballasts with analog control voltages
- Dimming with potentiometers
- Operation with ALTENBURGER-control modules with multiple pushbutton panels (e.g. setting of up to 6 light levels, Brighter, Darker, ON, OFF – see ALTENBURGER catalogue ALTOQUICK (AQ)-dimming controls).
- Combination with Multi-Sensors for the daylight dependent control and presence detection.
Direct Lighting control functions:
With connections to terminals T1/T2 and/or the analog control input AS the following switch/dim-functions directly with DALI ballasts can be realized:
1-switch-dim function
- ON/OFF, Brighter/Darker
- Storing a light level with double click
- The stored light level also is the switch ON value
2-pushbutton switch dim function
- ON/Brighter, Darker/OFF
- Light level storing by pressing both pushbuttons at a time
- The set light level is the switch ON value
(Multi)-Sensor-controls
The DC NV automatically recognizes immediately the connection of (Multi)-Sensors. The sensors are operating in dependence of the daylight and presence detection, alternatively with just one of both functions. Up to 6 Multi-Sensors, daylight- or motion sensors can be connected. The delay time after presence detection can be set at the module between 1 and 30 min. After this time lighting goes to a minimum level of 1 – 2 % and finally switches OFF after 10 min.